-
Janssuuh heeft gereageerd op het bericht Python Can 5 jaren, 1 maand geleden
Hi Thilo,
The ‘interface’ error it gives is a module installed with python-can. Have you tried installing this with the instructions on;
[pip install python-can]
-
Janssuuh heeft gereageerd op het bericht Python Can 5 jaren, 1 maand geleden
Hi Thilo, could you try to type; [python –version] in your terminal screen?! If it doesn’t reply with 2.7.9 than thats probably the issue.
Kind regards
Jeroen -
Janssuuh heeft gereageerd op het bericht Kodi op Raspbian 5 jaren, 1 maand geleden
Hi Thilo,
I’ll check the exact versions for you tomorrow, but I thought it was like this:Kodi Krypton 17.x
Raspbian Jessie (because it comes with Python version 2.7.9)
xbmc.gui library used in the script; […] -
Thilo en Janssuuh zijn nu vrienden 5 jaren, 1 maand geleden
-
Janssuuh reageerde in het onderwerp Help Can setup in het forum Audi Can-Bus Forum 5 jaren, 7 maanden geleden
Hi,
Could you specify the error the skin comes up with?
Also could you provide a scheme, or picture of your hardware / wiring?Thanks,
Knd regards
Jeroen -
Janssuuh reageerde in het onderwerp Kodi op Raspbian in het forum Audi Can-Bus Forum 5 jaren, 7 maanden geleden
Hi Piotr,
If the script does not recognizes your car it should use default values.
Could you send me a candump?Thanks,
Kind regards Jeroen -
Janssuuh reageerde in het onderwerp Kodi op Raspbian in het forum Audi Can-Bus Forum 5 jaren, 11 maanden geleden
Hi Dave,
It seems the trouble starts within the file “/etc/can.conf”
If you’ve installed the latest version (3.0.0) of hardbyte python (pip install python-can) you should safely be able to delete the config filr, because I added these settings withim the script.Hope it’ll work!
Kind regards,
Jeroen -
Janssuuh reageerde in het onderwerp Kodi op Raspbian in het forum Audi Can-Bus Forum 5 jaren, 11 maanden geleden
Hi Piotr,
I asume Rui made a very good point with his previous posts.
It has happened before that the (Hardbytes) PyCan library changed the position of the actual message in it’s Can-String.
You won’t notice any difference in the canlog, because this is being saved directly using Pican modules (Say; Not using Python).I can / will check this…[Verder lezen]
-
Janssuuh reageerde in het onderwerp Kodi op Raspbian in het forum Audi Can-Bus Forum 6 jaren geleden
Hi Rui,
Thanks for your input!
I haven’t been able to check changes with the new hardbyte version offered at their website. Indeed it’s a good solution to use the version I once downloaded…Also on the coolant temp there is some info available. I’ll quote an older post:
The ”settings.txt” at location ”/home/pi” per default contains this cont…[Verder lezen]
-
Janssuuh reageerde in het onderwerp Kodi op Raspbian in het forum Audi Can-Bus Forum 6 jaren geleden
Hi Dietmar,
If you use Full version, you must not install script.service.JanssuuhRnseBediening and script.service.JanssuuhSendCanToFIS!
These functions are built in and would run twice… (resulting in weird behaviour)Btw: If you own a vehicle which uses 2G or 3G protocol and could manage a candump, I’m very interested to examine it for usage…[Verder lezen]
-
Janssuuh reageerde in het onderwerp Kodi op Raspbian in het forum Audi Can-Bus Forum 6 jaren geleden
Hi Piotr,
Thanks for your input!
I tested it (made a script which actually sends the exact same data as your car did during the specific log) but did not managed to break anything :S
Also I recorded the can-id pages while running your log/messages. Will post / share this tommorow.I uploaded a new version of the skin (0.0.45) which should be…[Verder lezen]
-
Janssuuh reageerde in het onderwerp Kodi op Raspbian in het forum Audi Can-Bus Forum 6 jaren, 1 maand geleden
Hi Piotr,
It’s been a while 🙂
I actually had to reassamble the hardware and install Raspbian! But it’s all up and running again!
Tonight I made a little python script which could ‘fake’ send can messages, which were read from a can-log file…
Now I’m afraid with all the restoring backups of my website I lost your logs 🙁 Do you still have a…[Verder lezen] -
Janssuuh reageerde in het onderwerp Kodi op Raspbian in het forum Audi Can-Bus Forum 6 jaren, 4 maanden geleden
Hi Piotr,
I got your latest can-dump, thanks for that!
I’ve read you disconnect can-bus from your Raspberry because of the FIS flickering.Actually in the latest Version (44) the script will listen to can-id 65F, which carries your Audi’s model and year.
I add an image of what the script (snippet) would do in your case;So it says ‘8P5’ year…[Verder lezen]
-
Janssuuh reageerde in het onderwerp Kodi op Raspbian in het forum Audi Can-Bus Forum 6 jaren, 4 maanden geleden
Hi Piotr,
Yes, actually I tried to backup the website which somehow corrupted the database… couldn’t restore latest backup either, so finally my hosting provider helped te restore a 2 weeks old backup :-S
I did make some changes to the function which determines car model / year based on can message (and prints it on settings page).
This is…[Verder lezen] -
Janssuuh heeft een nieuw bericht Rallycross: EKS Audi Sport heads to the mountain heights of Portugal geschreven 6 jaren, 6 maanden geleden
It is one of the toughest race tracks in the FIA World Rallycross Championship (World RX): this weekend (28/29 April) the circuit in the mountains of Montalegre (Portugal) awaits the EKS Audi Sport team and the […]
-
Janssuuh heeft een nieuw bericht Audi R8 LMS wins Blancpain GT Series Endurance Cup opener geschreven 6 jaren, 6 maanden geleden
With podium results clinched at Monza and at Navarra two Audi Sport customer racing teams and their drivers are in the top spots of the tables in two international racing series.
read on -
Janssuuh heeft een nieuw bericht Ultra-high voltage: The Audi e-tron prototype in a Faraday cage geschreven 6 jaren, 6 maanden geleden
The production version of the Audi e-tron prototype heralds the dawn of a new era for the brand with the four rings: The company is transforming from a classic carmaker to a systems supplier for mobility […]
-
Janssuuh heeft een nieuw bericht Daniel Abt’s first stint in new Audi e-tron FE05 geschreven 6 jaren, 6 maanden geleden
Premiere for Daniel Abt: Under the Spanish sun, the German Audi driver drove the new Audi e-tron FE05 to be fielded in the next Formula E season for the first time. In the two-day test at Calafat, the engineers […]
-
Janssuuh heeft een nieuw bericht Audi A6 allroad quattro wins “Auto Bild Allrad” reader survey geschreven 6 jaren, 6 maanden geleden
The Audi A6 allroad quattro (combined fuel consumption in l/100 km: 6.5 – 5.6*; combined CO2 emissions in g/km: 172 – 149*) is a resounding success, as confirmed by readers of “Auto Bild Allrad,” Europe’s large […]
-
Janssuuh heeft een nieuw bericht DTM: Farewell races for Ekström at Hockenheim geschreven 6 jaren, 6 maanden geleden
Emotional farewell after 17 years in DTM: Mattias Ekström will race in an additional Audi RS 5 DTM in the DTM season opener at the Hockenheimring, so giving motorsport fans yet another reason to watch the races […]
- Meer laden
Hello,
I am sorry but didn´t get it working right now. Would be thankful if you could help me out.
Thanks.