Hi,

Could you specify the error the skin comes up with?
Also could you provide a scheme, or picture of your hardware / wiring?

Thanks,
Knd regards
Jeroen

Hi Piotr,
If the script does not recognizes your car it should use default values.
Could you send me a candump?

Thanks,
Kind regards Jeroen

Hi Dave,
It seems the trouble starts within the file “/etc/can.conf”
If you’ve installed the latest version (3.0.0) of hardbyte python (pip install python-can) you should safely be able to delete the config filr, because I added these settings withim the script.

Hope it’ll work!
Kind regards,
Jeroen

Hi Piotr,

I asume Rui made a very good point with his previous posts.
It has happened before that the (Hardbytes) PyCan library changed the position of the actual message in it’s Can-String.
You won’t notice any difference in the canlog, because this is being saved directly using Pican modules (Say; Not using Python).

I can / will check this…[Verder lezen]

Hi Rui,

Thanks for your input!
I haven’t been able to check changes with the new hardbyte version offered at their website. Indeed it’s a good solution to use the version I once downloaded…

Also on the coolant temp there is some info available. I’ll quote an older post:

The ”settings.txt” at location ”/home/pi” per default contains this cont…[Verder lezen]

Hi Dietmar,

If you use Full version, you must not install script.service.JanssuuhRnseBediening and script.service.JanssuuhSendCanToFIS!
These functions are built in and would run twice… (resulting in weird behaviour)

Btw: If you own a vehicle which uses 2G or 3G protocol and could manage a candump, I’m very interested to examine it for usage…[Verder lezen]

Hi Piotr,

Thanks for your input!
I tested it (made a script which actually sends the exact same data as your car did during the specific log) but did not managed to break anything :S
Also I recorded the can-id pages while running your log/messages. Will post / share this tommorow.

I uploaded a new version of the skin (0.0.45) which should be…[Verder lezen]

Hi Piotr,

It’s been a while 🙂
I actually had to reassamble the hardware and install Raspbian! But it’s all up and running again!
Tonight I made a little python script which could ‘fake’ send can messages, which were read from a can-log file…
Now I’m afraid with all the restoring backups of my website I lost your logs 🙁 Do you still have a…[Verder lezen]

Hi Piotr,

I got your latest can-dump, thanks for that!
I’ve read you disconnect can-bus from your Raspberry because of the FIS flickering.

Actually in the latest Version (44) the script will listen to can-id 65F, which carries your Audi’s model and year.
I add an image of what the script (snippet) would do in your case;

So it says ‘8P5’ year…[Verder lezen]

Hi Piotr,

Yes, actually I tried to backup the website which somehow corrupted the database… couldn’t restore latest backup either, so finally my hosting provider helped te restore a 2 weeks old backup :-S

I did make some changes to the function which determines car model / year based on can message (and prints it on settings page).
This is…[Verder lezen]