Here you can find my candump: https://drive.google.com/open?id=1EHn79BgiST7x0J2CsbM6OzA2nOs9nPyB. As usually on my Google Drive. I performed several actions, including Bluetooth telephone connection, every door opened / closed separately, all lights on, pressing buttons on wheel and RNS-E. All on running engine. At the end I…[Lees meer]
Hallo allemaal, Ik ben terug 😀
With problems… Unfortunatelly…
I reinstalled solution, with manual installation of hardbyte-python and this is what I’m facing now:
– on can-id page1 i have only 00
– on can-id page2 i have only – (that’s new)
– on error log i have recognized python-can with version 3.1.0-rc.1 and “Info: Car model;”
– FIS…[Lees meer]
I made new candump after reinstallation of whole solution. You can take a look here: https://drive.google.com/file/d/1prX668ugw0BILu4CsKQ-k2FSI-iYTMJr/view?usp=sharing
For sure it will be more usefull for you. I don’t know why script is not recognizing my CAN ID’s properrly now 😐
I reinstalled whole solution as you adviced and still script is making errors in my car. FIS is flickering, phone module get’s crazy.
I can block sending DIS messages, but there is nothing on CARINFO screen. I can see settings.txt file for water temperature configuration and canserial.txt file, but there is nothing more. I assume Jeroen’s…[Lees meer]
Oh, vervangen hardbyte geholpen! Ik kan bewegen Kodi met mijn RNS-E knoppen zonder fouten, De resultaten worden finaal 😀 Dank u voor hulp 🙂
Now I need to find issue, with parameters on CARINFO screen :/ There is nothing on developers screen too, only 00 😐
I assume that initialization script sets all other scripts with proper CAN allocation of…[Lees meer]
Thank you Rui,
I’ll try to test it at weekend. I hope I’ll find some time… I followed your guide with lite version at the very beggining and later on updated into full version. So definitely what you said is my problem now.
Do you advice me to reinstall whole solution? Or modyfications in scripts will sole my issue now?
@Jeroen, have you…[Lees meer]
I see that last update is not making conflict with my CAN anymore! On booting there is one sec of conflict (one blink of BT module), so I assume it’s all normal, script is setting up. A little success, but…
Still there are no data received from car on screen. Connection seems fine, no conflict when can is up, I can see data on Pi…[Lees meer]
Ik doe Jeroen,
Can’t see upload section, so I’m sharing Excel you send me from my Google Drive: https://drive.google.com/open?id=1Czm6OZ7o7jn_vot2C0Hdzb-xvZrtQ0Eq
If you may need another log, I can make them for you this weekend. I heard about CAN scanners, maybe I should scan my car’s CAN?
Good to hear you again!
I hope you forum will be online now 😉
What about development, i put CAN module into only HEARING mode so I can manipulate in interface using RNS-E buttons. In only hear mode there is no flickering on FIS so I can use my radio normally and obviuosly don’t see any car parameters on radio. Unfortunatelly on your development…[Lees meer]
Something bad happened to forum? I see there is lack of posts and our discussion about issues in Audi A3 facelift dissapeared…
Jeroen did you find some time to investigate logs from my car? How can I fix CAN issues?