22 oktober 2017 om 13:49 #15152
so i change the addons.xml but only the same thing..
Here are my config: https://pastebin.com/F4b9rVCh
And here i make a Video whats happend: https://youtu.be/QzTgjBlov54
After a few seconds it changed back and in the Corner it Says “ID Problem”
Did u have any hints for me? Didnt know why is this Pefect running in Kodi 15 and with 17 it has Problems.22 oktober 2017 om 20:26 #15219
Thanks for your input!
Maybe / hopefully the ‘ID Problem’ could fix your issue.
This popup I programmed to becomes visible when there is an issue with the productid / serial combination.
Are you perhaps using new hardware?
(I’ll check this part of the script on Kodi 17 issues and get back to you on this.)
Jeroen22 oktober 2017 om 20:59 #15231
Hi; if everything goes wrong I can go back to Kodi 15. I have backuped my sdcard.
No Hardware changes, just updated from Kodi 15 via ssh with sudo apt–get update and sudo apt–get Kodi
24 oktober 2017 om 16:35 #15625
- Deze reactie is gewijzigd 3 maanden geleden door David Ziller.
I’d be happy to help you fix this. (It’s still just to cool to see my skin working in a R8!!)
The ProductID message is pointing in a direction which might be not to hard to solve.
During all the ssh commands, have you ever had a wired connection?
Somehow it seems the script can’t generate it’s first params if there never was a wired connection.
Please try to connect to internet via cable and then select the skin again.
If this does not work, could you send me a print screen of your settings menu (I don’t need IP addresses, you could erase them if you want / or send private message).
Jeroen24 oktober 2017 om 20:15 #15692
Puuuuuh thats a Problem, i cant remove the Pi so Easy. Its Build in my Cd Changer and no Chance to connect a cable so quick to it 😀
I can only Put a Wifi Dongle into the USB Ports and Connect to a Wifi Point.
But i will try it on the weekend.
thank u28 oktober 2017 om 15:38 #16405
i found the Problem but i cant solve it.
So i restore my SD Card and do the Update Outside the Car connected via Cable.
All is Fine and Working on my Desktop, so i step into the Car.
Same Problem if i activate the Skin, the Videooutput stops, but no ID Problem anymore.
So i disconnect one of the Canbus Cables and Video Signal comes back.
If i connect it again Signal goes away.
So any Canbus message must blocked the VideoModul.
Is it possible to figured out with one? Is it possible to deactivate some canbus scripts by hand?
I have make the Video from the Situation 🙂 : https://youtu.be/fztugl-JhdM
so i backuped my sd Card and Kodi 15 with 0.30 is working fine.
Did u have any ideas?
Dave28 oktober 2017 om 20:12 #16462
Just to be sure (I added an option at version 31 which makes it possible to enable rearview cam by pressing S1 button on the can-bus board), your case cover seems to fit very tight on tbe board. It’s not pressing S1, which makes your Kufatec interface switch to different input?
Jeroen28 oktober 2017 om 21:36 #16498
mh i didnt have any buttons on my pi2can Board ( Layout: http://skpang.co.uk/catalog/images/raspberrypi/pi_2/IMG_0002.jpg)
So the Case is not pressing anything, looks tight but its okay 🙂
should i try 0.31 on Kodi 15 ? Maybe thats the Problem, i have only 0.30 in my Car and then updatet to Kodi 17 and 0.35,0.36,0.37
Dave28 oktober 2017 om 22:30 #16518
I made the S1 button script optional (you can enable / disable it at the Config page, should be off by default).
Jeroen28 oktober 2017 om 23:14 #16522
mh okay, if its off by default, this should not be the problem. i will check it tomorrow, some other ideas?29 oktober 2017 om 10:56 #16617
I start to think it’s also possible something went wrong during your update / upgrade process.
It will help a lot to have a look at your can-traffic logfile. It should be available at /home/pi/rnslogs.
Also to be sure your Video Interface is or isn’t responding to any can-messages I send, I uploaded a version which does not send any messages (so only RNS buttons should work).
Jeroen29 oktober 2017 om 12:23 #16635
Hey Jeroen thank u for the quick response,
i installed the whole pi new today, same Problem. No Picture.
Now i tested your NoCan-Send Skin and its works fine, no Picture issue.
But my /home/pi/rnslogs/ is empty.
Can we enable the Cansen step by step to find the wrong canmessage?
Thanks for ur quick Help 🙂29 oktober 2017 om 15:59 #16679
oh i didnt see the 0.38 Version. I will try it.
TEST No can-send Version works Perfect.29 oktober 2017 om 17:00 #16685
Ok iam back =)
0.38 works too, so the issue was the S1 Feature 🙂
One Little Problem is i hear a lot of “cantalk” Noises out of the Speakers and the Controls are very laggy
If i activate “Block FIS” then its all perfect!
Thank u very much 🙂29 oktober 2017 om 19:09 #16734
Sorry for Spam 😀
I found a Bug in 0.38
Every Restart i must set “Block FIS” again.
It doesnt save the state or reset it after a Restart.
If u can Fix this, the skin works Perfect =)
Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.